2.3–21 GHz broadband and high linearity distributed low noise amplifier

This paper focuses on the design of a 2.3–21 GHz Distributed Low Noise Amplifier (LNA) with low noise figure (NF), high gain (S₂₁), and high linearity (IIP3) for broadband applications. This distributed amplifier (DA) includes S/C/X/Ku/K-band, which makes it very suitable for heterodyne receivers. The proposed DA uses a 0.18 μm GaAs pHEMT process (OMMIC ED02AH) in cascade architecture with lines adaptation and equalization of phase velocity techniques, to absorb their parasitic capacitances into the gate and drain transmission lines in order to achieve wide bandwidth and to enhance gain and linearity. The proposed broadband DA achieved an excellent gain in the flatness of 13.5 ± 0.2 dB, a low noise figure of 3.44 ± 1.12 dB, and a small group delay variation of ±19.721 ps over the range of 2.3–21 GHz. The input and output reflection coefficients S₁₁ and S₂₂ are less than −10 dB. The input compression point (P_1dB) and input third-order intercept point (IIP3) are −1.5 dBm and 11.5 dBm, respectively at 13 GHz. The dissipated power is 282 mW and the core layout size is 2.2 × 0.8 mm².     

跨行政区游憩空间柔性一体化研究 ——以高莱茵河沿岸地区为例

随着城市化与区域一体化的迅速发展,不同行政区之间的联动关系越来越紧密,这种联动关系在城市各功能空间的设计上有所体现,更渗透到了与市民息息相关的游憩空间建构之中。受制于行政管理等方面的原因,在跨行政区的游憩空间一体化实施过程中,往往会采取一系列柔性措施。以欧洲高莱茵河沿岸地区为研究对象,分析高莱茵河沿岸地区游憩空间的发展与现状,总结其游憩空间体系的构建特点,为中国跨城市河流沿岸的游憩空间柔性一体化建构提供策略与建议。     

西汉徐地鲁恭王宫苑园林——鲁灵光殿研究

汉代是中国园林的形成阶段,不仅园林建筑物有所增加,成为住宅的延伸与扩展,而且人工造景比重也增大,造园要素趋于完备。园林的内容与功能随着社会生活的改变而逐步多样和完善,不仅是射猎、走狗、跑马的场所,还可以是游船、宴乐、赏鱼虫走兽、观看百戏的地方。造园在布局上也采用灵活多变的手法,按功能的需要,穿插安置不同形式的厅堂、楼阁、亭榭等。通过对鲁灵光殿时代背景及汉代园林、建筑营造形式的深入研究,结合文献的相关记述,梳理出鲁灵光殿的沿革,并以此为依据,对鲁灵光殿进行复原。     

概念辨析：建筑评论的思辨实践

建筑评论是一项针对具体对象,将目之所及的事物背后不可视的背景、思想、价值判断、驱动力等,转化为可以言说、可以讨论、具有建筑学和文化社会意义的思辨性活动。[1]这项活动的基础工作之一是概念的辨析与运用。因此,在东南大学建筑学院开设的"建筑评论课",通过课程主题的组织,在帮助学生建立多维批评视野的同时,以概念辨析为切入点,通过基于精读、研究的写作训练,实现思辨性思维的培养、学术素养和写作的培训,以及对建筑评论和中国现当代建筑话语的理解。     

基于数据运营安全的个人信息保护

个人信息因其自身携带隐私特性,与每个个体息息相关。个人信息保护不当,影响公众权益、企业利益以及社会秩序。在互联网、大数据、5G万物互联的时代,个人信息被广泛收集和使用,必须妥善解决个人信息保护问题,才能保障整个数据产业健康发展。而现有的个人信息保护方法或技术,不足以应对新形势下的保护诉求。基于数据运营安全的个人信息保护,针对当前个人信息保护的新形势和新诉求,提出结合人工智能,通过数据运营安全对结构化、半结构化、非结构化的个人信息流动的保护,涵盖从生产到运维,从采集、传输、存储、处理、分析、共享、销毁全生命周期保护,深入数据运营中内嵌防护,同时与业务解耦,达到保护个人信息安全的目标。     

瞬态闭锁试验在0.13 μm大规模集成电路中引起的潜在损伤

瞬态剂量率辐射试验会引起集成电路发生损伤或失效，其原因至少有两种：闭锁大电流引起的电路内部金属互连熔融；累积电离总剂量引起的氧化层电荷造成阈值电压偏移。本文以一种0.13 μm体硅CMOS处理器为对象，研究了瞬态剂量率和稳态电离总剂量辐射效应规律。结果表明：瞬态剂量率闭锁效应对处理器造成了显著的潜在损伤，导致其总剂量失效阈值从1 030 Gy(Si)降低至600 Gy(Si)。研究结论对于大规模集成电路的可靠性评估和指导辐射加固设计有重要参考意义。     

采用随机Petri网的嵌入式机载软件可靠性检测

针对嵌入式机载软件设计中存在的典型缺陷问题，结合嵌入式机载软件任务调度特性，提出采用随机Petri网对嵌入式机载软件设计进行仿真验证的可靠性检测方法，以提高嵌入式机载软件设计的可靠性。该方法采用随机Petri网对嵌入式机载软件系统行为建模，并给出典型缺陷的检测策略和判定准则，然后通过对Petri网模型进行仿真验证，检测系统是否存在此类设计缺陷；并给出了软件设计的运行流程的仿真验证算法，以支持对相应设计的可靠性检测。通过与其他可靠性检测方法的比较，表明了该方法的有效性。     

Approaching Ultrastable High‐Rate Li–S Batteries through Hierarchically Porous Titanium Nitride Synthesized by Multiscale Phase Separation

Porous architectures are important in determining the performance of lithium–sulfur batteries (LSBs). Among them, multiscale porous architecutures are highly desired to tackle the limitations of single‐sized porous architectures, and to combine the advantages of different pore scales. Although a few carbonaceous materials with multiscale porosity are employed in LSBs, their nonpolar surface properties cause the severe dissolution of lithium polysulfides (LiPSs). In this context, multiscale porous structure design of noncarbonaceous materials is highly required, but has not been exploited in LSBs yet because of the absence of a facile method to control the multiscale porous inorganic materials. Here, a hierarchically porous titanium nitride (h‐TiN) is reported as a multifunctional sulfur host, integrating the advantages of multiscale porous architectures with intrinsic surface properties of TiN to achieve high‐rate and long‐life LSBs. The macropores accommodate the high amount of sulfur, facilitate the electrolyte penetration and transportation of Li⁺ ions, while the mesopores effectively prevent the LiPS dissolution. TiN strongly adsorbs LiPS, mitigates the shuttle effect, and promotes the redox kinetics. Therefore, h‐TiN/S shows a reversible capacity of 557 mA h g^?1 even after 1000 cycles at 5 C rate with only 0.016% of capacity decay per cycle.     

Channel estimation and tracking with nested sampling for fast-moving users in millimeter-wave communication

Channel estimation is very challenging in millimeter-wave (mmWave) communications since the receiver is usually equipped with a limited number of radio-frequency (RF) chains and a large number of antennas. The receiver can only observe a low-dimensional projection of the received signals due to the huge gap between the numbers of RF chains and antennas. Instead of using the phase-shifter which is not a simple circuit at mmWave, we employ a switch network for analog design, which is equivalent to an antenna selection process. To increase the resolution and accuracy, a nested sampling strategy is used to formulate a virtual array with a larger aperture, aiming to reduce the complexity and power consumption of the system. We also consider the Doppler effect caused by the fast-moving user which may seriously deteriorate the channel estimation accuracy. Based on the covariance fitting criterion, a joint Doppler and channel estimation method is proposed without need of discretizing the angle space, and thus the model mismatch effect can be totally eliminated. Finally, we excavate the temporal variation law of the user to estimate the line-of-sight (LoS) channel in the current time slot by using the estimates from the previous two time slots. Numerical simulation results are provided to demonstrate the effectiveness and superiority of our proposed method.